2009 Peugeot 107

Underbody and suspension undersealed.

Front Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii))

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Suspension arm damaged and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp reflector seriously defective (4.1.1 (b) (ii))

Offside Rear Suspension arm damaged and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))

Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

front brake discs corroded

frontplaye sterring rack inner

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength full sill holed/detached (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting holed (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired axle mounting (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired axle mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired floor (5.3.6 (a) (i))

Rear fog lamp switch inoperative (4.5.3 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Play in steering rack inner joint(s)

Front Play in steering rack inner joint(s)

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all-over underbody corrosion (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner sill (5.3.6 (a) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)