1985 Talbot Express

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Fuel tank leaking (6.1.3 (b) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area is inadequately repaired inner sill/step (7.1.1 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear quarter (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner rear quarter (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is inadequately repaired inner sill/step (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer not working (3.5 (a))

Nearside Play in steering rack inner joint(s) ()

Oil leak, but not excessive (8.4.1 (a) (i))

offside front inner wheel arch corroded

vehicle has corrosion appearing everywhere

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Driver's seat insecure (6.2.A.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn not working (1.6.2a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside rear brake binding (3.7.B.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear rear brake application uneven (3.7.B.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

vehical suffering from general corossion

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tie bar/rod attachment bracket/mounting insecure (2.4.G.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim too far to the right (1.8)

Offside Front Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Front Tie bar/rod attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)

Offside Rear Suspension weakened but no possibility of the body or a component fouling a road wheel (2.4.A.1b)

Nearside Rear Leaf spring splayed but action not impaired (2.4.B.1c)

Offside Rear Leaf spring splayed but action not impaired (2.4.B.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear brake binding (3.7.B.1)

Nearside Rear Leaf spring splayed but action not impaired (2.4.B.1c)

Offside Rear Leaf spring splayed but action not impaired (2.4.B.1c)

corrosion around rear spring mountings n/s and o/s

corrosion on n/s and o/s front inner wheelarches

rear brake imbalance high

slight lift in steering column

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Steering column universal joint has slight play (2.1.5)

both front inner arches undersealed

both inner sills covered in underseal

nearside front jacking point corroded

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

nearside and offside front inner arches corroded

slight column lift

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

nearside and offside front inner arches corroded

slight column lift

Brake performance not tested (3.7.A.1)

Emissions not tested (7.0)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Brake hose leaking (3.6.A.1)

Offside Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Lower Brake hose ferrule excessively corroded (3.6.B.4e)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Rear Brake load sensing valve linkage seized (3.6.E.3)