1984 Talbot Express

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt starting to split (2.5.C.1a)

Nearside Front inner wing and scuttle corroded/weak

Nearside Front wheel bearing has slight play (2.5.A.3c)

Rear Brake pipe slightly corroded all (3.6.B.2c)

exhaust corroded

general corrosion underside

underside suspension/brake components heavily corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Body has slight corrosion inner wing (6.1.B.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

underside of vehicle has general corrosion

Fuel cap/sealing device sealing washer missing (7.2.4c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Body has slight corrosion inner wing (6.1.B.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake load sensing valve seized (3.6.E.3)

underside of vehicle has general corrosion

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear brake binding (3.7.B.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear brake binding (3.7.B.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Coolant leak ()

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

o/s headlight adjuster plastic pivot worn.

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp aim too low (1.8)

o/s headlight adjuster plastic pivot worn.

WATER PUMP VEE BELT LOOSE AND TWISTED

Offside Rear reflector missing (1.5.1a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Outer Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear reflector missing (1.5.1a)

Offside Headlamp aim too low (1.8)

Offside Headlamp insecure (1.7.3)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

WATER PUMP VEE BELT LOOSE AND TWISTED

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

rear metal brake pipes from compensator are rusting.

REAR METAL BRAKE PIPES ARE RUSTING BADLY.