MOT Status
ExpiredMileage
99,606 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Oil leak
Steering system has slight free play detected at steering wheel (2.2.A.1b)
body mountings starting to corrode
front coil springs starting to corrode
front to rear brake pipe starting to corrode
nearside front, offside front and rear brake hose ferrules starting to corrode
rear brake pipes slightly insecure
rear brakes slightly out of balance and offside judders slightly
slight damage to nearsiderear outer wheel rim
slight play in nearside front lower shock absorber mounting plate
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Offside rear brake juddering severely (3.7.A.5b)
Rear fog lamp not working (1.3.2b)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Oil leak
nearside front, offside front and rear brake hose ferrules starting to corrode
rear brake pipes slightly insecure
slight damage to nearsiderear outer wheel rim
slight play in nearside front lower shock absorber mounting plate
Brake load sensing valve linkage stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
body mountings starting to corrode
foot brake will require adjustment soon
front coil springs starting to corrode
front to rear brake pipestarting to corrode
nearside front brake binding slightly
rear brakes slightly out of balance
rear chassis starting to corrode and front chassis corroded just over 30cm from suspension mounting area
Brake load sensing valve linkage stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
front chassis starting to corrode
front to rear brake pipe starting to corrode
nearside front brake binding slightly
rear body mountings starting to corrode
rear brakes slightly out of balance
Brake load sensing valve linkage stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
foot brake slightly spongy in operation
front chassis starting to corrode
front to rear brake pipe starting to corrode
headlamps slightly insecure
rear body mountings starting to corrode
rear brakes binding slightly,drums slightly distorted and rear brakes slightly out of balance
Brake load sensing valve linkage stiff (3.6.E.3)
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
body mountings starting to corrode
front brakes slightly out of balance
offside wiper blade starting to split
parking brake performance slightly low
Brake load sensing valve linkage stiff (3.6.E.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
body mountings starting to corrode
front brakes slightly out of balance
offside wiper blade starting to split
parking brake performance slightly low
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
both front chassis rails corroding
engine idle speed slightly high
front brake imbalance near to limit
offside wiper blade split
rear spring bushes slightly displaced
slight play in nearside front shock absorber lower mounting
Nearside Rear Brake pipe inadequately clipped (3.6.B.1)
Offside front brake grabbing severely (3.7.A.2b)
rear brakes release unevenly (3.7.B.4)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
both front chassis rails corroding
engine idle speed slightly high
offside wiper blade split on end
rear spring bushes slightly displaced
slight play in nearside front shock absorber lower mounting
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Headlamp damaged but light output not reduced (1.7.5a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Headlamp damaged but light output not reduced (1.7.5a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Inner Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Outer Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear fog lamp tell tale not working (1.3.1b)
coolant leaking
fuel cap seal starting to deteriorate but not affecting seal
near side front wheel bearing dust cap missing
oil leak
slight play steering rack
very slight play in lower steering column bush
How Reliable is the Bedford Cf?
Based on 12,420 MOT tests across 1,482 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BPC 395Y is a 1983 Bedford Cf in White with a 2,300cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 63.6%.
Across all 1983 Bedford Cf models, the average MOT pass rate is 66.2% with a typical mileage of 57,879 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Bedford Cf fails its MOT is windscreen washer provides insufficient washer liquid, accounting for 798 recorded failures. If you're considering buying BPC 395Y, it's worth having these areas checked by a mechanic before committing.
The Bedford Cf typically stays on UK roads for around 56 years. At 43 years old, this Bedford Cf is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BPC 395Y?
You can check the full history of BPC 395Y by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BPC 395Y registered?
BPC 395Y is a 1983 Bedford Cf, first registered on 3 June 1983.
Is BPC 395Y safe to buy?
The MOT history for BPC 395Y shows 11 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BPC 395Y have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BPC 395Y. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.