2012 Citroen C1

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer and inner sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced inner sills both sides (6.1.1 (c) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both fronts (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both rear to flex (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

nearside/offside front to rear brake pipes at rear showing surface corrosion

some imbalance front brakes nearside lower effort 28%

some imbalance in rear foot brakes offside lower effort 22%

surface cracks in offside rear tyre in treaded area

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

nearside/offside front to rear brake pipes at rear showing surface corrosion

some imbalance front brakes nearside lower effort 28%

some imbalance in rear foot brakes offside lower effort 22%

surface cracks in offside rear tyre in treaded area

nearside front tyre worn on edges

nearside/offside front to rear brake pipes at rear surface corrosion(cleaned and greased

surface cracks in offside rear tyre in treaded area

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Headlamp aim beam image obviously incorrect ill fitted bulb (1.8.A.1b)

Nearside Front Outer Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

nearside front tyre worn on edges

nearside/offside front to rear brake pipes at rear surface corrosion(cleaned and greased

surface cracks in offside rear tyre in treaded area

wear in front brake disc faces

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)