2006 Citroen C1

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp insecure (4.1.1 (c))

Windscreen washer not working (3.5 (a))

Headlamp has a product on the lens but not seriously reducing light output misty lens (4.1.4 (b))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) wearing thin approx 3mm (1.1.13 (a) (ii))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill front to rear (7.1.1 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill front to rear (7.1.1 (a) (i))

Rear Shock absorbers has slight external damage to the casing both corroded (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened beam axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis both sides (5.3.6 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Registration plate lamp likely to become detached (4.7.1 (c) (ii))

Front Brake pad(s) wearing thin approx 3mm (1.1.13 (a) (ii))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill front to rear (7.1.1 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill front to rear (7.1.1 (a) (i))

Rear Shock absorbers has slight external damage to the casing both corroded (5.3.2 (b))

Rear Suspension arm corroded but not seriously weakened beam axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis both sides (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced underbody (6.1.1 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output misty lens (4.1.4 (b))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both links bushes perishing (5.3.4 (a) (i))

Front Both suspension arm rear bushes beginning to crack and perish

Hazards slight delay in operation (switch)

Various exhaust mounting brackets corroded

Electronic power steering warning lamp indicates a failure in the system (2.3.8)

ps light on when first started mot test steering heavy for first few minutes then corrected fault light out for remainder of test customer advised

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

ps light on when first started mot test steering heavy for first few minutes then corrected fault light out for remainder of test customer advised

marks on bodywork

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)