1985 Talbot Motorhome

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Fluid leak, but not excessive Oil leaks at engine. (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

All direction indicators not working Both front. (4.4.1 (a) (ii))

Front Registration plate missing (0.1 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At jacking point & inner wheel arch. (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At inner wheelarch at spring/shock absorber mounting. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength As above. (5.3.6 (a) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both rear. (4.7.1 (b) (ii))

Service brake excessively fluctuating Both rear. (1.2.1 (e))

Fluid leaking continuously posing a serious risk to road safety Diesel leak from engine. (8.4.1 (a) (ii)) DANGEROUS

Electrical wiring insecure At pedal cluster. (4.11 (a) (i))

Fluid leak, but not excessive Oil leaks at engine. (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak ()

Temp fuel cap fitted.

brake disc worn, pitted or scored, but not seriously weakened Both front. (3.5.1i)

Fuel system component leaking (7.2.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak ()

Temp fuel cap fitted.

brake disc worn, pitted or scored, but not seriously weakened Both front. (3.5.1i)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Vehicle structure has slight corrosion chassis and sills (6.1.B.2)

heavy corrosion o/s & n/s/f wheel arches

temp fuel cap fitted

serious engine oil leak

Nearside Front Electrical wiring inadequately supported in engine bay behind h/lamp (1.9.2a)

Offside Front Electrical wiring inadequately supported in engine bay behind h/lamp (1.9.2a)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger (6.1.B.2)

Offside Headlamp aim too high (1.8)

Offside Headlamp insecure (1.7.3)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Vehicle structure has slight corrosion chassis and sills (6.1.B.2)

heavy corrosion o/s & n/s/f wheel arches

temp fuel cap fitted

serious engine oil leak

Battery insecure excessive corrosion to battery tray/mounting area (1.9.1)

Exhaust has a major leak of exhaust gases at silencers (7.1.2)

Exhaust system not adequately supported complete system (7.1.1)

Nearside Rear Brake pipe inadequately clipped (3.6.B.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Offside Headlamp not working on main beam (1.7.5a)

Offside Indicator tell tale inoperative (1.4.A.2a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper blade insecure blade/arm insecure (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Service brake: efficiency below requirements (3.7.B.7)

Electrical wiring inadequately supported within engine bay (1.9.2a) DANGEROUS

Electrical wiring insecure within engine bay (1.9.2a) DANGEROUS

Exhaust has a major leak of exhaust gases pipe leaking at turbo mount & insecure (7.1.2) DANGEROUS

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b) DANGEROUS

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b) DANGEROUS

Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting (2.4.A.3) DANGEROUS

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering behind drivers front wheel (6.1.A.1) DANGEROUS

SUSPECT clutch is faulty/slipping

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

excessive corrosion to both front inner wheel arches

heavy corrosion to offside & nearside front footsteps

serious oil leak at engine

Rear Brake pipe slightly corroded (3.6.B.2c)

advise front brake discs

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust system not adequately supported (7.1.1)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Side repeater not working (1.4.A.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Rear fog lamp not working (1.3.2b)

advise front brake discs

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

advise front seats have excess movement but are of swivel type

o/s inner wheel arch corroded and holed but not within 30 cm of a prescribed area

spare wheel not allowing full underbonnet inspection

Brake load sensing valve linkage seized (3.6.E.3)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear Rear fog lamp not working (1.3.2b)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

advise front seats have excess movement but are of swivel type

o/s inner wheel arch corroded and holed but not within 30 cm of a prescribed area

spare wheel not allowing full underbonnet inspection

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Temporary fuel cap fitted

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

advise off side inner wing rusted and holed no in prcribed aere

advise off side reartyre cracked

both front tyres underinflated and worn unevenly

exhaust blowing at flexible joint

front edge of bonnet heavily corroded

Offside Front Headlamp insecure (1.7.3)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve linkage seized (3.6.E.3)