1987 Talbot Express

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp insecure (4.1.1 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Side repeater incorrect colour (4.4.3 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working (3.5 (a))

Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Speedometer operation impaired (7.8 (b) (i))

drivers seat has slight play

Drivers seat secure but swivel base has slight play

Nearside Front Inner Steering linkage ball joint has slight play rack end (2.1.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security leaf spring mount (6.2.2 (d) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Inner Steering linkage ball joint has slight play rack end (2.1.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security leaf spring mount (6.2.2 (d) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Passenger seat secure but swivel base has slight play

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Nearside Front Inner Steering linkage ball joint has slight play rack end (2.1.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security leaf spring mount (6.2.2 (d) (i))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Inner Steering linkage ball joint has slight play rack end (2.1.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security leaf spring mount (6.2.2 (d) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii))

Emissions not tested due to coolant leaking (8.2.2.2 (e))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Horn not working (7.7 (a))

Nearside Body component damaged and likely to cause injury side step (6.2.1 (a) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Position lamp not working side light (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Windscreen washer not working (3.5 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Windscreen wiper not working (3.4 (a))

Nearside Rear Bumper insecure (6.1.4 (a) (i))

Offside Front Body component damaged and likely to cause injury (6.2.1 (a) (i))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))

Offside Front Position lamp not working side light (4.2.1 (a) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper not working (3.4 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Oil leaking excessively from engine (8.4.1 (a) (i))

Bonnet seriously at risk of opening inadvertently (3.1 (b) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Electrical wiring likely to touch hot or rotating parts under hood (4.11 (a) (iii)) DANGEROUS

Coolant leak ()

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Nearside Front Brake hose slightly deteriorated x2 (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material to rear in centre (1.1.11 (c))

Nearside Front Lower Electrical wiring insecure (4.11 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced side step underside (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Offside Front Brake hose slightly deteriorated x2 (1.1.12 (b) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Service brake fluctuating, but not excessively (1.2.1 (e))

Steering column top bearing slightly worn (2.2.2 (b))

Corrosion under drivers entrance step

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Central Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security BUMPER SUPPORT PANEL (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security OUT RIGGER (6.2.2 (d) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security OUTER RIGGER (6.2.2 (d) (i))

Offside Rear LENS

Central Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security BUMPER SUPPORT PANEL (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security OUT RIGGER (6.2.2 (d) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security OUTER RIGGER (6.2.2 (d) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear LENS

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

corrosion underside

oil leak

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

offside front,original build/cab inner sill corroded outside of prescribed areas

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner bush (2.4.G.2)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

inner wing corroded outside prescribed area , offside front

temporary fuel cap fitted

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside rear brake excessively fluctuating (3.7.B.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement inner bush (2.4.G.2)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

exhaust mounting detached , x1

inner wing corroded outside prescribed area , offside front

temporary fuel cap fitted

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

1 exhuast mount missing

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Temporary fuel cap fitted

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Temporary fuel cap fitted

Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement (2.4.B.2)

Nearside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Fuel pipe leaking (7.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake load sensing valve linkage obviously incorrectly adjusted (3.6.E.3)

Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)