1987 Talbot Express

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Battery insecure (1.9.1)

Exhaust system not adequately supported (7.1.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded Door step and inner sill/floor pan (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch (2.4.A.3)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Seat belt anchorage prescribed area is excessively corroded Door step / sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch (2.4.A.3)

Offside Rear Braking system leaking Wheel cylinder (3.6.A.1)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring mount / rear cross member (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Battery tray corroded and holed

Nearside Front Tyre cracked and perished

Offside Front Brake hose has slight corrosion to ferrules Both (3.6.B.4e)

Steering column top bearing slightly worn (2.1.2c)

Battery tray area corroded

Bonnet corroded

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive suspension arm mounting area (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Oil leak

Vehicle underside has all over corrosion but not considered excessive

Central Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Indicator tell tale inoperative (1.4.A.2a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded inside passenger door (5.2.6)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area holed (multiple holes) (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded inner sill (multiple holes) (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Seat belt anchorage prescribed area is excessively corroded inside drivers door (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded inner arch area holed (multiple holes) (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (multiple holes) (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake load sensing valve seized (3.6.E.3)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen washer provides insufficient washer liquid Aim incorrect (8.2.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear of leafspring mount severely corroded (2.4.A.3) DANGEROUS

Battery tray area corroded

Bonnet corroded

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive suspension arm mounting area (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Oil leak

Vehicle underside has all over corrosion but not considered excessive

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust engine idle speed too high (7.3.A.2a)

Front brake disc in such a condition that it is seriously weakened both (3.5.1i)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)

Oil leak

Bonnet cannot be secured in the closed position (8.4.1)

Brakes imbalanced across an axle (3.7.B.5b)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside rear brake recording little or no effort (3.7.B.5a)

Registration plate lamp not working (1.1.C.1d)

Oil leak

front brake discs slight pitted

n/s rear tyre deteriorated

o/s rear brake slight bind

Nearside Front brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

battery warning light on

car has general rust on body and front of bonnet

Centre Exhaust system not adequately supported (7.1.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust mounting missing (7.1.1b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear fog lamp missing (1.3.2a)

Offside Side repeater incorrect colour (1.4.A.2f)

Position lamp switch faulty (1.1.A.1)

Rear Exhaust mounting missing (7.1.1b)

Registration plate lamp not working (1.1.5c)

Nearside Front brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

battery warning light on

car has general rust on body and front of bonnet

hand brake cable return spring missing

Brake pedal spongy (3.3.B.1b)

Exhaust system not adequately supported (7.1.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Side repeater incorrect colour (1.4.A.2f)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

advisorysd attatched

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)