1988 Harley Davidson 1200

Brake lever insecure (1.1.2 (e) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front All direction indicators obviously incorrectly positioned (4.4.3 (a))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front wheel bearings have slight free play (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp insecure (1.2.3b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings have slight free play (2.4.A.2c)

clutch cable to short tight on lock

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Fuel system component leaking (7.2.1a)

Headlamp aim too high (1.6)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Registration plate does not have black characters on a yellow background (6.3.2a)

clutch cable to short tight on lock

Exhaust noisy (7.1.2)

fuel tank repaire noted front right hand mounting braket closely inspected not leaking

Registration plate incorrect (6.3.1a)

Fuel tank leaking (7.2.1a)

Stop lamp remains on when the brake is released (1.3.1e)

Exhaust noisy (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim too high (1.6)

Registration plate character(s) not correctly formed (6.3.4b)

Registration plate margin less than the minimum requirement (6.3.4g)

Rear Wheel spoke slightly loose. (4.2.1b)