MOT Status
ExpiredMileage
62,726 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Hazard warning lamps inoperative (4.4.1 (e))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan [in yellow chalk] (5.3.6 (a) (i))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill [in yellow chalk] (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp switch inoperative (4.5.3 (a))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake performance not tested (1.2.1 (g))
Emissions not tested (8.2.1.2 (d))
Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear subframe slightly corroded
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
general corrosion underneath on body
offside rear brake slightly biunding
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front Shock absorber has a slightly worn bush (2.7.4)
Front Main beam 'tell-tale' not working (1.7.4c)
Front Shock absorber has a slightly worn bush (2.7.4)
Hazard warning switch faulty (1.4.B.1d)
Rear Exhaust system not adequately supported (7.1.1)
Rear Registration plate lamp not working (1.1.C.1d)
Front Horn not working (1.6.2a)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Vehicle structure has slight corrosion (6.1.B.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Rear fog lamp not working (1.3.2b)
Offside Steering rack insecure (2.2.B.1a)
Offside Body has slight corrosion (6.1.B.2)
nearside outer sill corroded
How Reliable is the Austin Mini 1000 City E Auto?
Based on 4,858 MOT tests across 552 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
F367 KGW is a 1989 Austin Mini 1000 City E Auto in Red with a 998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 1989 Austin Mini 1000 City E Auto models, the average MOT pass rate is 65.6% with a typical mileage of 42,521 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini 1000 City E Auto fails its MOT is steering rack gaiter split, accounting for 355 recorded failures. If you're considering buying F367 KGW, it's worth having these areas checked by a mechanic before committing.
The Austin Mini 1000 City E Auto typically stays on UK roads for around 44 years. At 37 years old, this Austin Mini 1000 City E Auto is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of F367 KGW?
You can check the full history of F367 KGW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was F367 KGW registered?
F367 KGW is a 1989 Austin Mini 1000 City E Auto, first registered on 3 March 1989.
Is F367 KGW safe to buy?
The MOT history for F367 KGW shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does F367 KGW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on F367 KGW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.