1989 Talbot Express

Brake performance unable to be tested due to clutch fault (1.2.1 (g))

Exhaust has a major leak of exhaust gases manifold split (6.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x3 (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer step (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x3 (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength tie rod mount (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced complete step panel (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer step x3 (7.1.1 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Fuel system component leaking (6.1.3 (b) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Rear Leaf spring anchor bracket corroded and seriously weakened (5.3.1 (b) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp insecure (4.1.1 (c))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Central Exhaust has a minor leak of exhaust gases tail box inner seam cracked (6.1.2 (a))

External frame showing signs of corrosion

Nearside Front Seat belt slightly damaged (7.1.2 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive near leaf spring bracket mounting point (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both sides front areas (5.3.6 (a) (i))

Tyre slightly damaged/cracking or perishing Both fronts (5.2.3 (d) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded Floor (1.1.21 (e) (i))

Offside Rear Leaf spring shackle pin or bush likely to become detached pin not reaching locking devise (5.3.4 (a) (ii)) DANGEROUS

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Indicator tell-tale inoperative (4.9.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

vehicle underbody unersealed

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

vehicle underbody unersealed

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front inner flitch corroded

Offside Rear wheel bearing has slight play (2.6.2)

Rear cross member badly corroded

Rear engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front inner flitch corroded

Offside Rear wheel bearing has slight play (2.6.2)

Rear cross member badly corroded

Rear engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)

Corrosion through out

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive front mount (2.4.A.3)

Offside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive wheel arch (2.4.A.3)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount (2.4.A.3)

Nearside Rear rear brake binding (3.7.B.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe leaking (3.6.A.1)

Offside Front Suspension component mounting prescribed area is excessively corroded jacking point (2.4.A.3)

Offside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive front mount (2.4.A.3)

Offside Front Inner Suspension spring mounting prescribed area is corroded but not considered excessive wheel arch (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear tyre perished

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside rear tyre perished

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside rear brake binding (3.7.B.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Suspension joint nearside lower dust cover split/missing

n/s/f jacking area holed outwith the prescribed area

n/s/r cross member holed at the spring assister

rear brakes out of ballance

slight bind on the o/s/r brake

Nearside Front wheel bearing has slight play (2.5.A.3c)

n/s & o/s/f out riggers holed outwith the prescribed area

o/s/r crossmember holed at the sring assister

Suspension joint nearside lower dust cover split/missing

corrosion starting to affect most areas of the front and rear suspension

handbrake cable return spring broken

Exhaust system not adequately supported (7.1.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim too low (1.8)

Offside Rear Shock absorber detached (2.7.2b)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Towbar retaining device missing (6.6.3a)

Suspension joint nearside lower dust cover split/missing

corrosion starting to affect most areas of the front and rear suspension

handbrake cable return spring broken

Suspension joint nearside lower dust cover split/missing

handbrake return spring broken

Centre Exhaust system not adequately supported (7.1.1)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension joint nearside lower dust cover split/missing

handbrake return spring broken

Exhaust system not adequately supported (7.1.1)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Front Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Exhaust mounting missing (7.1.1b)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Front Headlamp insecure (1.7.3)

Offside Rear rear brake application uneven (3.7.B.2)

Service brake: efficiency below requirements (3.7.B.7)

off-side and near-side front tyers wearing on outer walls

off-side and near-side rear lower shock absorbers bushes slightly perished

off-side front lower ball joint has slight movement

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Front Brake hose excessively damaged (3.6.B.4d)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)