1990 Talbot Express 1000 P

under seal throughout

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim too far to the right (4.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Direction indicator slightly affected by the operation of another lamp (4.4.3 (b))

under seal throughout

Gearbox mounting defective ()

Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

all brake components heavily corroded

all suspension components heavily corroded

road wheels heavily corroded

under side of vehicle heavily under sealed

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Exhaust system insecure (6.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Nearside Passenger's seat with a defective structure (6.2.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Suspension component attachment bracket/mounting likely to become detached air bag mount (5.3.3 (a) (ii)) DANGEROUS

Offside Front Electrical wiring likely to touch hot or rotating parts (4.11 (a) (iii)) DANGEROUS

Gearbox mounting defective ()

Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

all brake components heavily corroded

all suspension components heavily corroded

road wheels heavily corroded

under side of vehicle heavily under sealed

Exhaust mounting defective all rubber exhaust hangers perished/split (6.1.2 (a))

Front Gearbox mounting defective gearbox stabiliser mount perished/worn - advise change asap ()

Front Suspension arm corroded but not seriously weakened both sides lower suspension arms heavily corroded (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides lower arm inner bushes perished/worn (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides forward tie rod chassis anchor brackets heavily corroded (5.3.6 (a) (i))

Front Suspension rod corroded but not seriously weakened both sides forward tie rod corroded (5.3.3 (b) (i))

Front Suspension rod pin or bush worn but not resulting in excessive movement both sides forward tie rod - forward bushes perished/worn (5.3.4 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced main radiator surround panel corroded/holed lower edge (6.1.1 (c) (i))

Nearside front and rear wheel heavily corroded on inner dish

Offside Front Headlamp has a product on the lens but not seriously reducing light output headlight condensation inside light unit (4.1.4 (b))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced body panel/roof gutter drain channel corroded/holed (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule flexi ferrules corroded (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material pipes at rear axle area corroded (1.1.11 (c))

Rear Suspension bellows damaged but not to excess both sides bellows perished (5.3.5 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides leaf spring forward anchor bracket corroded (5.3.6 (a) (i))

Rear both sides leaf springs corroded

Front Registration plate inscription missing no plate damage part missing (0.1 (b))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides inner sill corroded/holed (6.1.1 (c) (i))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides under bonnet inner wings corroded/holed (6.1.1 (c) (i))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced window scuttle panel corroded/holed (6.1.1 (c) (i))

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bumper body/bracket - corroded/holed (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor area corroded/holed (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer and inner sill corroded/holed (6.1.1 (c) (i))

Offside Front Driver's seat with a defective structure seat back insecure/damaged (6.2.5 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step/sill corroded/holed (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wing - upper and forward - corroded/holed (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill - forward and rearward of wheel arch - corroded/holed (6.1.1 (c) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides valance panel and under/inner wing closing panels corroded/holed (5.3.6 (a) (i))

Central Front Vehicle structure is corroded but structural rigidity is not significantly reduced grille body surround corroded/holed (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both discs heavily corroded/worn (1.1.14 (a) (ii))

Front both sides front tie rod mount brackets corroded

Front gear box stabiliser mount heavily perished/worn

Nearside Front Bumper mountings corroded but not likely to become detached bumper body corroded (6.1.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material pipe corroded (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced door panel/skin/surround corroded/holed (6.1.1 (c) (i))

Offside Front hand brake sleeve insecure

Rear Leaf spring anchor bracket corroded but not seriously weakened both sides forward spring mounts corroded (5.3.1 (b) (i))

Rear Suspension bellows damaged but not to excess both air bags perished (5.3.5 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all wheel arch lips corroded/holed (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced upper body drain channel lip - corroded/holed (6.1.1 (c) (i))

all exhaust box rubber hangers perished

Exhaust mounting defective all 4 rubber mountings worn (6.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing 185/14c (5.2.3 (d) (i))

both front inner sills holed and corroded

o/s/f step sill corroded

temp fuel cap fitted

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.C.1d)

Temporary fuel cap fitted

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Registration plate lamp not working (1.1.C.1d)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Temporary fuel cap fitted

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Exhaust emits clearly visible black smoke during acceleration (7.3.A.2c)

Nearside Front Brake hose excessively damaged (3.6.B.4d)

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

both rear wheel bearings worn

both rear wheels corroded

nearside front inner wing holed and corroded

nearside front wheel badly corroded

nearside lower step holed and corroded

rear valence holed and corroded

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp insecure (1.7.3)

Windscreen has a combination of minor damage areas which restrict the drivers view (8.3.1c)

both rear wheel bearings worn

both rear wheels corroded

nearside front inner wing holed and corroded

nearside front wheel badly corroded

nearside lower step holed and corroded

rear valence holed and corroded

corrosion to underbody

corrosion to wheel rims

corrosion to brake discs and wheel rims

Exhaust system not adequately supported (7.1.1)

Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Side repeater not working (1.4.A.2c)

corrosion to brake discs and wheel rims

rear panel holed and corroded

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Fuel hose leaking (7.2.3)

Fuel system component leaking (7.2.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

rear panel holed and corroded

surface corossion around underbody areas & n/s/r tyre wall cracking

remould fitted to n/s/r

surface corossion around underbody areas

Brake load sensing valve linkage seized (3.6.E.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc excessively pitted (3.5.1h)

Fuel pipe leaking (7.2.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)