1991 Yamaha TZR125

Front Drive chain sprocket worn to excess (6.2.1e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Throttle operating incorrectly (6.2.1f)

Horn missing (1.7.1)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) DANGEROUS

head lamp lose

ignition lose

left hand bar bent

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

gear lever lose

rear light has only one bulb working

right hand bar bent

seat lose

wires hanging down at front of stearing

Drive chain excessively tight (6.2.1d)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Horn not working (1.7.3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake disc(s) slightly worn (3.2.A1l)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front shock absorber has light misting of stanchion (2.3.3)

nearside rear side light not working

Footrest missing (6.2.1a)

Front wheel bearings have excessive free play (2.3.5b)

Front wheel spindle securing nut locking device insecure (2.3.5a)

Rear Brake cylinder leaking hydraulic fluid (3.2.B1e)

Rear Brake master cylinder insecurely mounted (3.2.B1a)

Rear Brake pad(s) contaminated by oil or grease (3.2.A1k)

Rear Hydraulic brake control feels spongy (3.1.4a)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal pivots slightly worn (3.1.3a)