2007 Moto Guzzi Griso

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

n/s/r footrest seized

Headlamp aim too high and too far to the left. (1.6)

Offside Rear Direction indicators not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

n/s/r footrest seized

Offside Rear Direction indicator not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Throttle operating incorrectly (6.2.1f)

Rear Footrest missing (6.2.1a)

Offside Front Brake lever is so short and the brake cannot be readily applied (3.1.3c) DANGEROUS

Slight wear in front brake bobbins.Front brake pads wearing unevenly. Speedo insecure.

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front mudguard nearside front bolt not securing mudguard

Front tyre valve cap

Nearside Inner Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside pillion footrest pivot seized

Offside rear indicator broken and loose

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear brake pedal eccentric adjuster loose

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front mudguard nearside front bolt not securing mudguard

Front tyre valve cap

Nearside Inner Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside pillion footrest pivot seized

Offside rear indicator broken and loose

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear brake pedal eccentric adjuster loose

pillion foot rests seized