1991 Talbot Express

Horn control insecure (7.7 (b))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension unit damaged but not to excess Airbag deteriorated. (5.3.5 (b) (i))

Offside Front Lower O/S/F Lower body holed and corroded. Not within prescribed area.

Offside Front Lower Oil leak, but not excessive Gearbox oil seal. (8.4.1 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Suspension unit damaged but not to excess Airbag deteriorated. (5.3.5 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective 2 rubbers missing (6.1.2 (a))

Front Upper Position lamp with a multiple light source up to 1/2 not functioning both (4.2.1 (a) (i))

Nearside Front Outer Track rod end ball joint has slight play please keep checked or renew (2.1.3 (b) (i))

Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Service brake binding but not excessively to max limit (1.2.1 (f))

Offside Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Rear Wheel bearing has slight play both sides is this std for this vehicle ? please keep checked (5.1.3 (a) (i))

Vehicle structure has slight corrosion (6.1.A.1)

Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Body has slight corrosion (6.1.B.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front brake disc slightly pitted (3.5.1h)

n/s/r handbrake effort low compaired with o/s/r effort

o/s/f front door sill needs welding on inner edge

rear brake aplication slightly uneven

Brake pipe excessively corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust mounting missing (7.1.1b)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front brake disc excessively pitted (3.5.1h)

Nearside Front Brake pipe fouled by moving parts (3.6.B.2a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

rear brake application uneven (3.7.B.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

offside front door sill needs welding on inner edge

Exhaust mounting missing (7.1.1b)

Front brake disc excessively pitted (3.5.1h)

Horn not working (1.6.2a)

Nearside Front Lower Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Registration plate lamp not working (1.1.5c)

Rear Brake hose excessively deteriorated (3.6.B.4d)

Rear wheel bearing has slight play (2.6.2)

offside rear tyre low 2mm

rear bumper insecurely bolted on