MOT Status
ExpiredMileage
75,946 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake disc worn, pitted or scored, but not seriously weakened both front discs (1.1.14 (a) (ii))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Central Brake pipe excessively corroded front to back (1.1.11 (c))
Nearside Front Lower Brake pipe excessively corroded (1.1.11 (c))
Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Brake disc worn, pitted or scored, but not seriously weakened both front discs (1.1.14 (a) (ii))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Central Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced jacking point (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Inner Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
exhaust loose on joint
Front Brake pipe corroded, covered in grease or other material to master cylinder (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Headlamp not working on dipped beam (4.1.1 (a) (ii))
Horn sound not in accordance with requirements (7.7 (c))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake pipe corroded, covered in grease or other material to master cylinder (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
exhaust rubber split
handbrake cable rubbing on exhaust system
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
exhaust deteriorated
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
exhaust deteriorated
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Both rear and near side front tyres starting to perish/split......Replacement recommended
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Corrosion on all prescribed areas and has been extensively welded.
Nearside Handbrake has poor performance
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle extensively undersealed .
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer sill holed (5.3.6 (a) (i))
Brake pipes covered in underseal
Nearside handbrake weak
Offside Rear tyre cracked / perished
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Wheel bearing has slight play both (5.1.3 (a) (i))
Suspect chassis / sills corroded, all covered in underseal
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive front cross member (2.4.A.3)
Nearside Rear Leaf spring anchor bracket corroded but not seriously weakened (2.4.B.6d)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive anchor mount (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive shackle mount (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive front cross member (2.4.A.3)
Offside Rear Leaf spring anchor bracket corroded but not seriously weakened (2.4.B.6d)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive anchor mount (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive shackle mount (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak ()
oil seald under camper
Brake pipe inadequately clipped (3.6.B.1)
Nearside Front Brake hose excessively chafed (3.6.B.4d)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Oil leak
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Brake pipe inadequately clipped (3.6.B.1)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nail in nearside rear tyre
Oil leak
battery loose
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear wheel bearing has slight play (2.6.2)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear Stop lamp not working (1.2.1b)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear wheel bearing has slight play (2.6.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside front tyre has cracking on wall/tread
Nearside rear tyre has cracking on wall/tread
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside rear tyre has cracking on wall/tread
Exhaust system not adequately supported (7.1.1)
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside front tyre has cracking on wall/tread
Nearside rear tyre has cracking on wall/tread
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside rear tyre has cracking on wall/tread
BOTH REAR TYRES HAVE CRACKS AROUND THE OUTER WALLS.
O/S FRONT WIPER BLADE IS SLIGHTLY TORN.
REAR EXHAUST MOUNTING RUBBER IS SLIGHTLY TORN AND ADVISE REPLACING.
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s rear brake slightly binding
How Reliable is the Talbot Express?
Based on 171,025 MOT tests across 8,371 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J161 EAU is a 1992 Talbot Express in White with a 1,905cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 1992 Talbot Express models, the average MOT pass rate is 66.6% with a typical mileage of 68,439 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Talbot Express fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 6,812 recorded failures. If you're considering buying J161 EAU, it's worth having these areas checked by a mechanic before committing.
The Talbot Express typically stays on UK roads for around 41 years. At 34 years old, this Talbot Express is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J161 EAU?
You can check the full history of J161 EAU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J161 EAU registered?
J161 EAU is a 1992 Talbot Express, first registered on 1 April 1992.
Is J161 EAU safe to buy?
The MOT history for J161 EAU shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J161 EAU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J161 EAU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.