1991 Yamaha XTZ750

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Position lamp not working (4.2.1 (a))

Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Clutch lever pivot pin loose

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened worn (1.1.14 (a) (ii))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

no indicators fitted but bike has single seat and obviously intended for off road use.

Brake fluctuation could not be accurately tested as Knobbly tyres are fitted.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Handlebar guards hit clocks on full lock.

No indicators fitted but bike has single seat conversion and is obviously used off road.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pivot worn, but not excessively (brake pedal) (1.1.15 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Front Brake master cylinder leaking (1.1.10 (b) (ii)) DANGEROUS

Brake disc worn, but not excessively front discs measured at 3.2mm and 2.2mm but unable to find minimum thickness requirement (1.1.14 (a) (i))

Brake disc worn, but not excessively rear disc measured at 2.0mm but unable to find minimum spec. (1.1.14 (a) (i))

Brake fluctuation could not be accurately tested as it has knobbly tyres fitted.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front handlebar guards hit clocks on full lock

No indicators fitted BUT bike has been converted to single seat and obviously used off road.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pivot worn, but not excessively brake pedal (1.1.15 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Horn not working (7.7 (a) (ii))

Offside Front Brake disc contaminated oil (1.1.14 (b))

Registration plate does not conform to the specified requirements small (0.1 (d))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake fluctuation could not be accurately tested as it has knobbly tyres fitted.

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front handlebar guards hit clocks on full lock

Front tyre contaminated by oil

No indicators fitted BUT bike has been converted to single seat and obviously used off road.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pivot worn, but not excessively brake pedal (1.1.15 (b))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear tyre contaminated by oil

Registration plate slightly loose (0.1 (a))

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

Nearside Rear Direction indicator damaged and function impaired (1.5.3a)

Nearside Rear Direction indicator not working (1.5.1c)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)

offside chain adjuster plate insecure

Rear Brake disc(s) slightly worn (3.2.A1l)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Horn not working (1.7.3a)

Offside Headlamp aim too high (1.6)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn is not a constant note (1.7.3c)

Horn not loud enough to be heard by another road user (1.7.3a)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear mono-shock insecure (2.4.B.4)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension component loose (2.4.A.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play (2.4.A2a(i))