MOT Status
ValidMileage
47,785 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All suspension components corroded
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Tyre slightly damaged/cracking or perishing ALL 4 (5.2.3 (d) (ii))
All suspension components corroded
Front Registration plate insecure (0.1 (a))
Horn not working (7.7 (a))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Tyre slightly damaged/cracking or perishing ALL 4 (5.2.3 (d) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Tyre slightly damaged/cracking or perishing All four tyres (5.2.3 (d) (ii))
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Tyre slightly damaged/cracking or perishing All four tyres (5.2.3 (d) (ii))
Emissions not tested (8.2.1.2 (d))
Front Exhaust emissions likely to be affected by an exhaust leak Suspect manifold leaking (8.2.1.1 (b))
Front Windscreen washer not working (3.5 (a))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Headlamp insecure (4.1.1 (c))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp insecure (4.1.1 (c))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Position lamp switch does not illuminate the front and rear position lamps with a single operation (4.2.2 (a))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Wheel arch area (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Tyre slightly damaged/cracking or perishing All four tyres.185/14 (5.2.3 (d) (ii))
Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))
Offside Front Lower Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security headlamp/front panel (6.2.2 (d) (i))
Offside Front Lower Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security headlight/front panel (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))
Horn sound not in accordance with requirements (7.7 (c))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Nearside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))
Offside Front Lower Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security headlamp/front panel (6.2.2 (d) (i))
Offside Front Lower Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security headlight/front panel (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))
Nearside Front Suspension component ball joint has slight play (5.3.4 (a) (i))
Oil misting around sump.
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Outer Body has slight corrosion sill corroded (6.1.B.2)
Offside Rear Body has slight corrosion light lens area (6.1.B.2)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Exhaust system not adequately supported (7.1.1)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Outer Suspension component mounting prescribed area is excessively corroded ach corroded by door hindge (2.4.A.3)
Offside Front Headlamp aim too high (1.8)
Offside Front Headlamp insecure (1.7.3)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Front Side repeater not working (1.4.A.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded back panel by rear spring hanger (2.4.A.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Rear Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid not working (8.2.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Outer Body has slight corrosion sill corroded (6.1.B.2)
Offside Rear Body has slight corrosion light lens area (6.1.B.2)
Nearside Front Outer Body has slight corrosion sill corroded.not in a prescribed area (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Horn not loud enough to be heard by another road user (1.6.2b)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Headlamp insecure (1.7.3)
Offside Front Battery insecure (1.9.1)
Offside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill corroded / rear leaf spring mount corroded [ 2 places] (2.4.A.3)
Rear Brake pipe inadequately clipped axle beam (3.6.B.1)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Outer Body has slight corrosion sill corroded.not in a prescribed area (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Battery insecure (1.9.1)
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill x2 (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded rear valance inner (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded rear valance outer (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Headlamp adversely affected by the operation of another lamp (1.7.5c)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Registration plate lamp not working (1.1.C.1d)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front bumper insecure
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Exhaust system not adequately supported (7.1.1)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Side repeater not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Non obligatory mirror damaged
Offside Front Headlamp aim too high (1.8)
Nearside Rear wheel bearing has excessive play (2.6.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Headlamp aim too high (1.8)
Offside Rear wheel bearing has excessive play (2.6.2)
Rear Registration plate lamp not working (1.1.C.1d)
Non obligatory mirror damaged
emissions showed no reading as the exhaust system was badly damaged will need an emissions test when vehicle is presented for retest.
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Headlamp insecure (1.7.3)
Rear Exhaust system not adequately supported (7.1.1)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Centre exhaust rubber broken but exhaust is still secure
Corrosion to nearside front inner wing
Offside headlight adjuster droken
Offside Headlamp aim too far to the right (1.8)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Centre exhaust rubber broken but exhaust is still secure
Corrosion to nearside front inner wing
Offside Front wheel bearing has slight play (2.5.A.3c)
Offside headlight adjuster droken
general corrosion
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
general corrosion
How Reliable is the Talbot Express?
Based on 171,025 MOT tests across 8,371 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J646 OWD is a 1992 Talbot Express in Beige with a 1,971cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 54.8%.
Across all 1992 Talbot Express models, the average MOT pass rate is 66.6% with a typical mileage of 68,439 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Talbot Express fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 6,812 recorded failures. If you're considering buying J646 OWD, it's worth having these areas checked by a mechanic before committing.
The Talbot Express typically stays on UK roads for around 41 years. At 34 years old, this Talbot Express is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J646 OWD?
You can check the full history of J646 OWD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J646 OWD registered?
J646 OWD is a 1992 Talbot Express, first registered on 14 February 1992.
Is J646 OWD safe to buy?
The MOT history for J646 OWD shows 31 tests with a 54.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J646 OWD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J646 OWD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.