MOT Status
ExpiredMileage
98,467 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Hazard warning tell-tale is not a flashing light (4.9.2 (a))
Main beam tell-tale not working (4.9.1 (a) (ii))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS
Offside Front Inner Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected wing (5.3.6 (a) (ii)) DANGEROUS
Driver's door catch deteriorated so the door cannot be readily opened or closed from the inside (6.2.3 (c) (i))
Hazard warning tell-tale is not a flashing light (4.9.2 (a))
underside of vehicle corroded
Front Exhaust system insecure 2 x rubbers split (6.1.2 (a))
Nearside Front Brake pipe leaking on an air braking system under bonnet (1.1.11 (b) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in inner arch (5.3.6 (a) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
underside of vehicle corroded
Central exhaust rubber split
Front Exhaust has a minor leak of exhaust gases join (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Inner Body has slight corrosion wheel arch (6.1.B.2)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt leaking grease slightly (2.5.C.1a)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak ()
Bonnet cannot be secured in the closed position (8.4.1)
Main beam 'tell-tale' not working (1.7.4c)
Offside Rear Subframe mounting prescribed area is excessively corroded at rear panel (2.4.A.3)
Rear fog lamp not working (1.3.2b)
Registration plate lamp not working (1.1.C.1d)
Central exhaust rubber split
Front Exhaust has a minor leak of exhaust gases join (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Inner Body has slight corrosion wheel arch (6.1.B.2)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt leaking grease slightly (2.5.C.1a)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak ()
Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front wheel trim loose
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear innerwing corroded
exhaust leak at front joint
Bonnet cannot be secured in the closed position (8.4.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp aim too low (1.8)
Nearside Headlamp insecure (1.7.3)
Offside Battery insecure (1.9.1)
Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded innerwing several places (2.4.A.3)
Rear Brake pipe inadequately clipped on axle (3.6.B.1)
Rear fog lamp not working (1.3.2b)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front wheel trim loose
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
exhaust leak at front joint
Nearside Front Direction indicators not working (1.4.A.2c)
Rear wheel bearing has excessive play both (2.6.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
small split nearside rear tyre outer wall
Battery insecure
nearside front brake disc corroded
offside front brake disc corroded
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear wheel bearing has slight play (2.6.2)
nearside front disc corroded on inside face
offside front disc corroded on inside face
Offside Front Brake pipe slightly corroded (3.6.B.2c)
rear spring brackets getting corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front position lamp(s) not working (1.1.A.3b)
Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Talbot Express 1000 P?
Based on 10,406 MOT tests across 547 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J660 CVF is a 1991 Talbot Express 1000 P in White with a 1,971cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 1991 Talbot Express 1000 P models, the average MOT pass rate is 63.8% with a typical mileage of 73,820 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Talbot Express 1000 P fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 583 recorded failures. If you're considering buying J660 CVF, it's worth having these areas checked by a mechanic before committing.
The Talbot Express 1000 P typically stays on UK roads for around 37 years. At 35 years old, this Talbot Express 1000 P is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J660 CVF?
You can check the full history of J660 CVF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J660 CVF registered?
J660 CVF is a 1991 Talbot Express 1000 P, first registered on 1 November 1991.
Is J660 CVF safe to buy?
The MOT history for J660 CVF shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J660 CVF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J660 CVF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.