1991 Talbot Express 1300 P

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively wiper linkage worn (3.4 (b) (ii))

Nearside Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp aim not tested (4.1.2 (b))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper not working (3.4 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust silencer insecure (8.1.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

all exhaust rubbers cracked

oil leak

both door mirrors slightly deteriorated

n/s inner sill corroded

o/s inner sill corroded

Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)

Brake pedal spongy (3.3.B.1b)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Nearside Upper Rear position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Rear fog lamp not working (1.3.2b)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear parking brake recording little or no effort (3.7.B.6a)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced across an axle (3.7.B.5b)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front brake disc excessively scored (3.5.1h)

Nearside Front Brake pipe inadequately clipped (3.6.B.1)

Nearside Front Lower Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Upper Brake hose excessively deteriorated (3.6.B.4d)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear wheel bearing has excessive play (2.6.2)

front brake application uneven (3.7.B.2)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

exhaust mounting rubbers deteroireating

Offside Front Side repeater not working (1.4.A.2c)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

battery insecure

exhaust rubbers perished

n/s/f inner arch/flitch repair poor,repair seperating.

rear spring shackle mounts corroded

washers would benefit from adjustment