1994 Talbot Express

Both rear sills corroded.

Corrosion under bonnet on both front wheel archies.

Front crossmember corroded.

Under body been waxoiled.

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front corrosion inner wing

Nearside Rear outer sill corroded

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front corrosion inner wing

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

variouse patches welded underneath,unable fully inspect due to underseal

Horn not working (7.7 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Windscreen wiper not working (3.4 (a))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

variouse patches welded underneath,unable fully inspect due to underseal

Brake hose ferrule excessively corroded Front All 4 (1.1.12 (f) (i))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Panel (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel (6.2.2 (d) (i))

Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front inner wheel arch corroded at front

hole in back panel

N/S inner wheel arch corroded

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

N/S inner wheel arch corroded

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Corrosion to n/s/f inner arch at front not witin 12" of a load bearing member

Corrosion to o/s inner sill behind step not within 12" of a load bearing member

Unable to fully inspect for corrosion due to excessive amounts of underseal

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Corrosion to n/s/f inner arch at front not witin 12" of a load bearing member

Corrosion to o/s inner sill behind step not within 12" of a load bearing member

Unable to fully inspect for corrosion due to excessive amounts of underseal

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Oil leak

corrosion to various parts of chassis

corrosion to various parts of floors

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Oil leak

corrosion to various parts of chassis

corrosion to various parts of floors

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim too high (1.8)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Direction indicators not working (1.4.A.2c)

Registration plate lamp not working (1.1.5c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front brake disc excessively pitted (3.5.1h)