1993 Talbot Express

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer cill in door step area (7.1.1 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower to inner wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer cill near forward leaf spring mounting (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear shackle mount (5.3.6 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear shackle mount (5.3.6 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Leaf spring anchor bracket corroded but not seriously weakened All four mounting brackets corroded (5.3.1 (b) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Nearside Front Lower Battery insecure and likely to cause a short circuit leisure battery in lower section of engine bay (4.13 (a) (ii))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in front of axle (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind axle (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing front of axle (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of axle by rear spring hanger (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer cill (7.1.1 (a) (i))

Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer cill in front of rear wheel x2 patches (5.3.6 (a) (i))

Offside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced behind front axle body outrigger (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing forward of axle (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch rear of axle (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer cill rear of axle (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of axle by spring hanger (5.3.6 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mount (5.3.6 (a) (i))

Rear Leaf spring anchor bracket corroded but not seriously weakened all four mounting brackets corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

slight corrosion under vehicle

corrosion to the nearside front inner wing

corrosion to the underside in several areas

front valance corroded

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Non obligatory mirror damaged ()

corrosion to the nearside front inner wing

corrosion to the underside in several areas

front valance corroded

Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Non obligatory mirror damaged ()

corrosion to the nearside front inner wing

corrosion to the underside in several areas

front valance corroded

corrosion to the nearside and offside front inner wings

slight roughness in the offside rear wheel bearing

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

nearside front inner wing corroded

slight roughness in the offside rear wheel bearing

exhaust rubbers perished

Centre Exhaust system not adequately supported (7.1.1)

front bumper bracket corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Oil leak

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

coil spring corroded (2.4.C.1b)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Oil leak

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

coil spring corroded (2.4.C.1b)

front bumper bracket corroded

All exhaust mounting rubbers deteriorating

Battery insecure

Nearside Front Brake hose slightly chafed (3.6.B.4d)

Nearside Front Drag link end ball joint has slight play (2.2.B.1f)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly chafed (3.6.B.4d)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Radiator deteriorating

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear wheel bearing has excessive play (2.6.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear wheel bearing has excessive play (2.6.2)

Offside Stop lamp not working (1.2.1b)

All exhaust mounting rubbers deteriorating

Battery insecure

Nearside Front Brake hose slightly chafed (3.6.B.4d)

Nearside Front Drag link end ball joint has slight play (2.2.B.1f)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly chafed (3.6.B.4d)

Offside Front Drag link end ball joint has slight play (2.2.B.1f)

Radiator deteriorating

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Registration plate lamp not working (1.1.5c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front Lower Brake pipe excessively corroded (3.6.B.2c)

Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear Registration plate lamp not working (1.1.5c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Centre Exhaust mounting missing (7.1.1b)

Centre Exhaust system not adequately supported (7.1.1)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Horn not working (1.6.2a)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)