2008 Yamaha XC 125 E Vity

Central Lower Motorcycle structure joining/attachment plate or fastening insecure centre stand not secure (6.1.1 (b) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Rear Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Front front brake lever bent but can still be applied

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever not releasing correctly (1.1.2 (b) (i))

seat has no lock fitted, is cable tied shut

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Front front brake lever bent but can still be applied

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever not releasing correctly (1.1.2 (b) (i))

seat has no lock fitted, is cable tied shut

Headlamp aim too low (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy slightly stiff (2.2.2 (f) (i))

headlight bulb flickers and sometimes goes out when handle bars are turned from lock to lock

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake lever is bent but brake can still be readily applied and cannot be applied smoothly (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Headlamp aim too low (4.1.2 (a))

Headlamp insecure front panel insecure (4.1.1 (c))

Nearside Front Direction indicator incorrect colour white (4.4.3 (a))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Handlebar grip insecure to handlebar half missing and insecure (2.2.1 (d) (ii)) DANGEROUS

Direction indicator insecure handle bar cowel loose (4.4.1 (c) (i))

Front Brake lever is bent but brake can still be readily applied and cannot be applied smoothly (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

belly pan hanging off could become detached and go under rear wheel

exhaust not properly supported bolt missing and one mount damaged

seat loose does not lock

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nail in rear tyre

Rear reflector on motorcycle obscured (1.4.1)

Nail in rear tyre

Handlebar deformed (2.1.1b)

Horn not working (1.7.3a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))