2002 Aprilia Habana

Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))

Front Headlamp aim projected beam image obviously incorrect No beam projected to test (4.1.2 (c))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Fuel cap leaking (6.1.3 (b) (i))

Horn sound not in accordance with requirements (7.7 (c))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Nearside Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

rubber engine bush perished

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Mudguard insecure ()

rubber engine bush perished

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

bolt missing from rear mudguard

exhaust corroded

rubber engine mounting block perished

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

rear tyre tread getting low

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

rear mudguard loose

rear tyre tread getting low

engine mounting rubbers worn out

rear mudguard insecure

Rear Stop lamp not working (4.3.1 (a) (ii))

engine mounting rubbers worn out

rear mudguard insecure

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))