MOT Status
ExpiredMileage
143,631 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Headlamp aim too high (1.8)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low and too far to the left. (1.8)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust mounting missing (7.1.1b)
Nearside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)
Parking brake: efficiency below requirements (3.7.B.7)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust mounting missing (7.1.1b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Inner Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)
Offside Inner Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Audi 80?
Based on 246,995 MOT tests across 40,227 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
M231 MBE is a 1994 Audi 80 in Red with a 1,595cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 45.5%.
Across all 1994 Audi 80 models, the average MOT pass rate is 63.1% with a typical mileage of 132,494 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi 80 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,695 recorded failures. If you're considering buying M231 MBE, it's worth having these areas checked by a mechanic before committing.
The Audi 80 typically stays on UK roads for around 38 years. At 32 years old, this Audi 80 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of M231 MBE?
You can check the full history of M231 MBE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was M231 MBE registered?
M231 MBE is a 1994 Audi 80, first registered on 1 August 1994.
Is M231 MBE safe to buy?
The MOT history for M231 MBE shows 11 tests with a 45.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does M231 MBE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on M231 MBE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.