1995 BMW 520

Nearside Rear Inner sill corroded

Offside mirror damaged

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Steering box has excessive movement between sector shaft and the drop arm (2.1.3 (a) (ii)) DANGEROUS

Nearside Rear Inner sill corroded

Offside mirror damaged

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Fuel Pipe/s corroded ()

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust system insecure (6.1.2 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Fuel Pipe/s corroded ()

Offside mirror damaged

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills / wings (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside mirror damaged

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills / wings (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Coil spring corroded all 4 (5.3.1 (b) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front outer sills by front jacking point corroded but not within perscribed area

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front nearside outer sill by front jacking point corroded but not within perscribed area

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Suspension component mounting prescribed area is excessively corroded outer sill around jacking point (2.4.A.3)

corrosion on nearside front outer sill jacking point but not within perscribed area

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear All rear suspension bushes and dust gaiters perished.

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear All rear suspension bushes and dust gaiters perished.

Engine covers fitted obscuring some components in the engine bay

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Under-trays fitted obscuring some underside components

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp not working on dipped beam (1.7.5a)

all four tyre`s slightly perrished

slight corrosion to offside rear floor

Exhaust system not adequately supported (7.1.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Front brake disc slightly pitted (3.5.1h)

Nearside front brake juddering slightly (3.7.A.2b)

Nearside rear brake juddering slightly (3.7.A.5b)

Offside front brake juddering slightly (3.7.A.2b)

Offside rear brake juddering slightly (3.7.A.5b)

Rear brake disc slightly pitted (3.5.1h)

Rear brake disc slightly pitted (3.5.1h)

Exhaust system not adequately supported (7.1.1)

Rear brake disc slightly pitted (3.5.1h)