MOT Status
ExpiredMileage
169,861 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front tyres nearly petruding past wheel arces
Offside Front Drag link end ball joint has slight play (2.1.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front tyres nearly petruding past wheel arces
Offside Front Drag link end ball joint has slight play (2.1.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Brake pedal anti-slip provision missing (3.3.A.1b)
Emissions not tested due to exhaust blow (7.3.A.1)
Nearside Front Seat belt anchorage prescribed area is excessively corroded chalked from previous inspection (5.2.6)
Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired cill welding in compleate (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Fuel Pipe/s corroded ()
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
under body corrosion
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front position lamp(s) incorrect colour (1.1.A.3e)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) incorrect colour (1.1.A.3e)
Nearside Front Body has slight corrosion outer sill underside (6.1.B.2)
underbody fuel pipe corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in offside rear tyre
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
centre exhaust rubber deteriated
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Steering column top bearing slightly worn (2.1.2c)
Steering system lightly rubbing (2.2.D.2a)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Steering column top bearing slightly worn (2.1.2c)
How Reliable is the BMW 520?
Based on 1,661,806 MOT tests across 152,584 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N568 LCD is a 1995 BMW 520 in Blue with a 1,990cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 1995 BMW 520 models, the average MOT pass rate is 67.4% with a typical mileage of 125,342 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 520 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 47,121 recorded failures. If you're considering buying N568 LCD, it's worth having these areas checked by a mechanic before committing.
The BMW 520 typically stays on UK roads for around 35 years. At 31 years old, this BMW 520 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N568 LCD?
You can check the full history of N568 LCD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N568 LCD registered?
N568 LCD is a 1995 BMW 520, first registered on 31 August 1995.
Is N568 LCD safe to buy?
The MOT history for N568 LCD shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N568 LCD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N568 LCD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.