2002 BMW 520

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Oil leak, but not excessive and level on minimum (8.4.1 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

All four tyres worn on inner edges

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Oil leak, but not excessive and level on minimum (8.4.1 (a) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Headlamp deteriorated but light output not reduced both sides (1.7.5a)

Oil leak and level on minimum ()

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Nearside Rear Anti-roll bar linkage insecure bracket broken off of wishbone (2.4.G.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Headlamp deteriorated but light output not reduced both sides (1.7.5a)

Offside Windscreen washer provides insufficient washer liquid loose pipework (8.2.3)

Oil leak and level on minimum ()

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Nearside Rear Anti-roll bar linkage insecure (2.4.G.1)

Nearside Rear Suspension arm damaged and seriously weakened anti roll bar linkage bracket broken (2.4.G.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

nearside rear tyre worn close to legal limit and perrishing

offside rear tyre wearing down low and perrishing

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

nearside rear tyre worn close to legal limit and perrishing

offside rear tyre wearing down low and perrishing

nearside rear tyre approaching the minimum legal limit on the inside edge

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Outer Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Anti-roll bar linkage cracked (2.4.G.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front pads wearing low

Rear Brake pipe slightly corroded (3.6.B.2c)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)