1996 Harley Davidson XLH1200

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension arm corroded but not seriously weakened Suspension units (5.3.3 (b) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swinging arm (5.3.4 (a) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension corroded but not seriously weakened Suspension units (5.3.3 (b) (i))

Suspension corroded but not seriously weakened Swinging arm (5.3.3 (b) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Horn sound not in accordance with requirements (7.7 (c))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brake excessively binding (1.2.1 (f))

Rear Position lamp not working (4.2.1 (a))

Drive belt slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Disc warped

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Cracked number plate

Rear Brake disc(s) slightly worn (3.2.A1l)

Front wheel bearings have excessive free play (2.3.5b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings have slight free play (2.3.5b)

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Headlamp aim too low (1.6)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Front wheel bearings have slight free play (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Front wheel bearings have slight free play (2.3.5b)

Rear Drive belt excessively loose. (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicators not working (1.5.1c)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Stop lamp remains on when the brake is released (1.3.1e)

Front wheel bearings have slight free play (2.3.5b)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Front wheel bearings have slight free play (2.3.5b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Oil leak

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have slight free play (2.3.5b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Front Brake pipe excessively corroded (3.2.B2a)

Throttle operating incorrectly (6.2.1f)

Front wheel bearings have slight free play (2.3.5b)

Rear suspension bearing has slight free play (2.4.A2a(i))

Front wheel bearings have slight free play (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)