2008 Suzuki Gz 125 K8

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii))

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Brake pedal has inadequate reserve travel (3.1.3b)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake pad(s) less than 1.5 mm thick missing (3.2.A1f(i)) DANGEROUS

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)