1999 Harley-davidson Xlh 883

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Stop lamp not working (4.3.1 (a) (ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear slight cracking sidewall rear tyre

Front Tyre worn close to the legal limit (4.1.3(ii))

Brake lever mounting insecure (3.1.2a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake component worn but not seriously reduced in strength (3.2.A1)

Nearside Direction indicator slightly discoloured (1.5.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake disc(s) excessively worn (3.2.A1l)

Offside Direction indicator deteriorated and function impaired (1.5.3a)

Registration plate deteriorated (6.3.1d)

Registration plate insecure (6.3.1b)

Drive chain slightly tight (6.2.1d)

Front Brake component worn but not seriously reduced in strength (3.2.A1)

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too low (1.6)

Nearside Direction indicator slightly discoloured (1.5.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Chain guard missing

Drive chain lightly rubbing (6.2.1d)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Side stand retained by luggage cord

Front Brake lever mounting insecure (3.1.2a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Headlamp aim too high and too far to the right. (1.6)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Drive chain lightly rubbing (6.2.1d)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Chain guard missing

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Side stand retained by luggage cord

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Registration plate deteriorated (6.3.1d)