2003 Yamaha WR400

Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicle presented for daytime running only

Horn sound not in accordance with requirements weak (7.7 (c))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Vehicle presented for daytime running only

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust noisy (7.1.2)

machine was tested under daylight hours criteria

Horn is not continous or uniform bulb horn fitted (1.7.3c)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Front suspension fouling which affects the movement of the front suspension. tyre fouling fork leg (2.3.6a) DANGEROUS

Rear Rear mono-shock pivot excessively worn all linkage bushes (2.4.B.4) DANGEROUS

Centre kickstart bolt loose

Exhaust noisy (7.1.2)

Front Brake disc(s) slightly worn (3.2.A1l)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

fork shroud damaged by front tyre

rear shock gas chamber close to exhaust

rear tyre damaged by chain, no chain guard or roller fitted

Brake lever is short but brake can still be readily applied (3.1.3c)

Exhaust noisy (7.1.2)

Centre Front Lower Headlamp aim headlamp damaged but function not impaired (1.2.3a)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front Wheel spoke excessively loose (4.2.1b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Registration plate incorrect (6.3.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)