2006 Chituma Ctm 125-C

Suspension pin, bush or joint worn but not resulting in excessive movement swinging arm (5.3.4 (a) (i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Brake pedal has inadequate reserve travel (3.1.3b)

Brake pedal pivots excessively worn (3.1.3a)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain slightly loose (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain worn to excess (6.2.1e)

Front Brake lever has inadequate reserve travel insufficient thread thro' lower adjusting nut (3.1.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Headlamp insecure (1.2.3b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear suspension component loose (2.4.A.1a)

Registration plate obscured (6.3.1d)

fork seal cover split

os foot peg bent

rear brake pedel has travel

Brake locking device missing (3.2.A1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Wheel corroded significantly reducing the original strength (4.2.1a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)