2004 Yamaha TDM900

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Brake pad(s) contaminated both fronts(fork oil) (1.1.13 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front & Rear tyres are perishing

Front & Rear tyres are perishing

Front Position lamp not working (4.2.1 (a))

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Exhaust noisy (7.1.2)

Front Roller brake test indicates a binding brake (3.3.A1a)

Exhaust noisy (7.1.2)

Drive chain worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake disc(s) cracked (3.2.A1g)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain excessively loose (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

Headlamp aim too high and too far to the right. (1.6)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp does not emit a steady light (1.3.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)