2017 Lexmoto Viper Sk 125-22A

Exhaust noisy (8.1.1 (a))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Position lamp not working (4.2.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust noisy (8.1.1 (a))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Handlebar deformed but serviceable (2.2.1 (c) (i))

The Front Brake Lever Bracket loose But Still Secure

The Rear Tyre Has Slight Cracking In The Sidewalls

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front Brake has no recorded effort at a wheel on pedal linked brake (1.2.1 (a) (ii))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))

Clutch lever bent (6.2.7 (b))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Headlamp reflector slightly defective (4.1.1 (b) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Clutch lever bent (6.2.7 (b))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Headlamp aim too low (4.1.2 (a))

Headlamp reflector slightly defective (4.1.1 (b) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Clutch lever bent (6.2.7 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))