2012 Chevrolet Orlando

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

All direction indicators slightly discoloured all (4.4.3 (a))

Coolant leak ()

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Fuel Pipe/s corroded ()

Oil leak, but not excessive from engine (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced nearside and offside (6.1.1 (c) (i))

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

All direction indicators slightly discoloured all (4.4.3 (a))

Coolant leak ()

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Fuel Pipe/s corroded ()

Oil leak, but not excessive from engine (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced nearside and offside (6.1.1 (c) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

rear seatbelts not tested due to car seat in rear

Offside Rear Registration plate lamp not working (1.1.C.1d)

rear seatbelts not tested due to car seat in rear

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)