2002 Harley Davidson Fxd

Rear reflector missing (4.8.2 (a) (ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Handlebar mounting slightly deteriorated both risers have some corrosion under the chrome plating (2.1.1d)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

front tyre perished

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive belt spocket slightly worn (6.2.1e)

rear brake pads 80 percent worn

Offside Rear Direction indicators not working (1.5.1c)

Rear Exhaust markings indicating not for road use or similar wording (7.1.4)

Stop lamp affected by the operation of another lamp (1.3.2)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive belt spocket slightly worn (6.2.1e)

front brake hose fitted incorrectly

number plate broken

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

front brake hose fitted incorrectly

front pads getting low

number plate broken

Steering movement slightly 'notchy' (2.2.1b)

advise front brake pipe routing by caliper poor

advise no. plate cracked

advise side stand opp stiff

Exhaust markings indicating not for road use or similar wording (7.1.4)

Steering movement slightly 'notchy' (2.2.1b)

advise front brake pipe routing by caliper poor

advise no. plate cracked

advise side stand opp stiff

Drive belt slightly loose (6.2.1d)

Steering headbearing has slight free play (2.2.2)

clutch cable routed incorrectly

front brake hose routed incorrectly

gearchange pedal end loose

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.3)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Throttle operating incorrectly (6.2.1f)

Clutch cable routed incorrectly

Front brake hose routed incorrectly

Gearchange pedal end loose

Steering headbearing has slight free play (2.2.2)