2000 Piaggio PK125

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Direction indicator not working (4.4.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Headlamp aim too high (4.1.2 (a))

Rear Position lamp not working (4.2.1 (a))

Rear reflector reflecting white to the rear (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) incorrect colour (4.7.2 (a))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Offside Rear Direction indicator not working (1.5.1c)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

front tyre pressure low

throttle returns slowly

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Headlamp aim too high (1.6)

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

front tyre pressure low

throttle returns slowly

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front wheel bearings have slight free play (2.3.5b)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Lower Motorcycle structure slightly corroded (6.1.1a)

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

bike smells of fuel but no signs of leaking ?

front and rear tyre pressures low

front tyre pressure low

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

front tyre pressure low

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front wheel bearings have slight free play (2.3.5b)

Lower Motorcycle structure slightly corroded (6.1.1a)

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

bike smells of fuel but no signs of leaking ?

front and rear tyre pressures low

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fuel cap mounting flange/sealing method defective (7.2.2c)

Headlamp aim too high (1.6)

Indicator tell tale not functioning (1.5.2)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension assembly slightly corroded. (2.3.1)

Front wheel bearings have slight free play (2.3.5b)

Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

horn sounds when steering turn't

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension assembly slightly corroded. (2.3.1)

Front suspension spring corroded but not seriously weakened (2.3.2b)

Front wheel bearings have slight free play (2.3.5b)

Lower Motorcycle structure slightly corroded (6.1.1a)

Oil leak

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Fuel cap mounting flange/sealing method defective (7.2.2c)

Headlamp aim too high (1.6)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension assembly slightly corroded. (2.3.1)

Front suspension spring corroded but not seriously weakened (2.3.2b)

Front wheel bearings have slight free play (2.3.5b)

Lower Motorcycle structure slightly corroded (6.1.1a)

Oil leak

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear wheel bearings have slight free play (2.4.A.2c)

rear tyre pressure low

horn a little quiet

spare tyre flat

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

Oil leak

Front Brake hose excessively chafed (3.2.B3a)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Hydraulic brake control feels spongy (3.1.4a)

Headlamp aim too high (1.6)

Headlamp main beam flickers when tapped lightly by hand (1.2.2c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))