2001 BMW 520

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to the legal limit wearing outer wall (4.1.E.1)

Offside Front Inner Tie bar/rod has slight play in a ball joint (2.4.G.2)

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt both front (2.4.G.2)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt front upper suspension arm ball joint (2.4.G.2)

Nearside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Offside Rear Front suspension ball joint dust cover damaged, but preventing the ingress of dirt upper suspension arm ball joint (2.4.G.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp aim too high (1.8)

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt both front (2.4.G.2)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt front upper suspension arm ball joint (2.4.G.2)

Nearside Rear rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Offside Rear Front suspension ball joint dust cover damaged, but preventing the ingress of dirt upper suspension arm ball joint (2.4.G.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Centre Rear Statutory seat belt missing (5.1.1)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

rear parking brake recording little or no effort Both (3.7.B.6a)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Wheel bolt(s) missing (4.2.A.1e)

Offside Front Headlamp aim too high (1.8)

Offside Front Wheel bolt(s) missing (4.2.A.1e)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

airbag light stays on

Engine covers fitted obscuring some components in the engine bay

Offside Front Tyre worn close to the legal limit (4.1.E.2b)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Engine covers fitted obscuring some components in the engine bay

Offside Front Tyre worn close to the legal limit (4.1.E.2b)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Tyre worn close to the legal limit (4.1.E.2b)

under tray fitted

Rear Tyre worn close to the legal limit (4.1.E.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

under tray fitted

Centre Stop lamp not working (1.2.1b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

engine top cover fitted.

half engine tray fitted.

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Headlamp aim too low and too far to the left. (1.8)

Offside Rear fog lamp not working (1.3.2b)

engine top cover fitted.

half engine tray fitted.

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

half engine tray fitted.